Computer Copier
Windows 10 & 11 Buy license · $29.95
Troubleshooting

Windows PCs Can't See Each Other on the Network? How to Fix It

Two Windows 10 or 11 PCs can't see each other on the same network? Check the network profile, discovery settings, firewall and router isolation.

Updated 5 minute read The Computer Copier team

When two computers can't see each other on the network in Windows 11 or Windows 10, the cause is almost always one of five things: the network is set to Public instead of Private, network discovery is off, a firewall or security suite is blocking local traffic, the PCs are on different networks (often a guest Wi-Fi), or the router is isolating devices from each other. Work through them in that order and most problems are fixed in a few minutes.

Below are the exact checks for each one, plus a quick test to tell whether the PCs really cannot reach each other or simply are not showing up in File Explorer.

Quick checklist: why two PCs can't see each other

CauseHow to checkFix
Network profile is PublicSettings > Network & internet > your connectionSet it to Private on both PCs
Network discovery is offAdvanced sharing settingsTurn on network discovery for Private networks
Firewall or security suiteTemporarily test with it pausedAllow local network traffic or the app you are using
Different networksipconfig on both PCsConnect both to the same main network
Router isolation (AP or client isolation)Router settings, guest networkUse the main Wi-Fi or a cable, or turn isolation off
VPN runningVPN app or system trayDisconnect the VPN during the transfer

How to set the network to Private in Windows 11 and 10

Windows treats a Public network as untrusted, like a cafe or airport Wi-Fi. On a Public profile the PC hides itself and blocks most incoming local connections, which is exactly what stops two machines finding each other at home.

  1. Open Settings > Network & internet.
  2. Click Wi-Fi (or Ethernet if the PC is wired), then click the network you are connected to. On Windows 11 you may need to open its properties first.
  3. Under Network profile type, choose Private network. On Windows 10 the same option appears as Private under the network profile on the connection's properties page.
  4. Repeat on the second PC. Both must be Private.

Only do this on a network you trust, such as your own home or office. Leave public hotspots on Public.

How to turn on network discovery

Network discovery is what lets a PC announce itself and see others. With the profile set to Private, it is usually on already, but it is worth confirming.

  1. In Windows 11, go to Settings > Network & internet > Advanced network settings > Advanced sharing settings.
  2. Under Private networks, turn on Network discovery. If you also want to open shared folders, turn on File and printer sharing.
  3. In Windows 10, the same switches are in Control Panel > Network and Sharing Center > Change advanced sharing settings.

If network discovery keeps switching itself off, check that the Windows services Function Discovery Provider Host and Function Discovery Resource Publication are running. You can find them by typing services.msc into the Start menu search. Setting them to start automatically often stops discovery from turning off again.

Can they actually reach each other? A quick test

The Network view in File Explorer is not a reliable test. Modern Windows sometimes leaves computers out of that list even when they can talk to each other perfectly well. A better check is to find each PC's address and test the connection directly.

  1. On each PC, open Command Prompt and type ipconfig. Note the IPv4 Address, for example 192.168.1.24.
  2. On a typical home network, both addresses should share the first three numbers, such as 192.168.1.x. If they differ, the PCs are probably on different networks or different routers.
  3. From one PC, run ping 192.168.1.24 using the other PC's address. Replies mean the two machines can reach each other.

A failed ping is not always conclusive, because a firewall can block ping while still allowing other traffic. But if the addresses look right and the ping works, your problem is discovery or sharing settings, not the network itself.

Why the firewall can stop two PCs finding each other

Windows Firewall applies different rules to Private and Public networks, which is another reason the profile matters. If the profile is Private and discovery is on but the PCs still cannot see each other, look at any third-party security software. Many antivirus suites include their own firewall that blocks local network traffic regardless of the Windows settings.

To test, pause the suite's firewall briefly on both PCs, try again, then turn it back on. If that fixes it, add a rule in the suite that trusts your home network or allows the app you are using, rather than leaving protection off.

Guest Wi-Fi, mesh systems and AP isolation

Many routers have a setting called AP isolation, client isolation or wireless isolation. It stops devices on the same Wi-Fi from talking to each other, and it is usually switched on for guest networks by design. If one PC is on the guest network and the other is on the main one, or both are on the guest network, they will not see each other.

  • Connect both PCs to the main network name, not the guest one.
  • If your router has a separate 2.4 GHz and 5 GHz network name, they are usually the same network, but check the router settings if in doubt.
  • Plugging both PCs into the router with Ethernet cables avoids Wi-Fi isolation altogether, and is usually faster for a big transfer too.
  • If one PC is connected through a VPN, disconnect it. A VPN can route its traffic away from your local network.

Mobile hotspots and some mesh systems also isolate clients. Using the main router directly is the simplest fix. If the connection works but is slow, see why file transfers between computers are slow.

If you are setting up a new PC: the easier way to connect

If the reason you need the two PCs to see each other is to move your files to a new computer, you do not need to set up shared folders at all. Computer Copier connects the two machines for you: install it on both, click New PC on one and Old PC on the other, and the old PC finds the new one automatically. A 6-digit pairing code confirms you are connecting to your own PC, and the files go directly between the two computers with nothing uploaded to the cloud.

When installed, it adds a Windows Firewall rule for private networks, so the profile checks above still apply: both PCs should be on the same main network, set to Private. If the network simply will not cooperate, for example on an office network with isolation you cannot change, you can save the transfer to a USB stick or external drive on the old PC and unpack it on the new one instead. Our guides to transferring files PC to PC over Wi-Fi and using an Ethernet cable cover both routes in more detail.

Frequently asked questions

Why can't my PC see other computers on my network?

The network is often set to Public, which hides the PC. Change it to Private in Settings, Network and internet, then turn on network discovery.

Can the firewall stop two PCs finding each other?

Yes. A third-party firewall or security suite can block local discovery even when Windows Firewall allows it.

What is AP isolation on a router?

A setting, common on guest networks, that stops devices on the same Wi-Fi from talking to each other. Use the main network for transfers.

Get three guides like this every month, plus software update notices.Subscribe →