Computer Copier
Windows 10 & 11 Buy license · $29.95
How-to

How to Transfer Files Between Two Computers With an Ethernet Cable

Use an Ethernet cable to transfer files between two PCs much faster than Wi-Fi: through your router or direct cable, and the settings that make it work.

Updated 4 minute read The Computer Copier team

To transfer files between two computers with an Ethernet cable, either plug both PCs into your router with a cable each, or connect them directly to each other with one standard Ethernet cable. Then share a folder on one PC and copy from it on the other. Going through the router is the simplest, because both PCs get addresses automatically. A direct cable works anywhere, even without a router, but needs a couple of network settings.

Either way, a wired connection is usually faster and steadier than Wi-Fi, which matters most when you are moving a whole computer's worth of photos and videos.

What you need

  • An Ethernet cable. Cat5e or newer supports gigabit speeds. You do not normally need a crossover cable, because modern network ports detect the cable type automatically.
  • An Ethernet port on each PC. Many thin laptops have none. A USB to Ethernet adapter (USB-C or USB-A) fills the gap and is recognized by Windows without extra software in most cases.
  • An account with a password on the PC you copy from, so the other PC can sign in to its shared folder.

Option 1: Connect both PCs to your router

This is the easiest setup, and it keeps both PCs online.

  1. Plug each PC into a spare port on your router (or a network switch connected to it).
  2. On each PC, open Settings > Network & internet > Ethernet and set the network profile type to Private.
  3. Turn on network discovery and file and printer sharing. In Windows 11, go to Settings > Network & internet > Advanced network settings > Advanced sharing settings. In Windows 10, use Network and Sharing Center > Change advanced sharing settings.
  4. Continue with "How to share and copy the files" below.

If one PC has no port, you can still wire just the old PC to the router and leave the new one on Wi-Fi. It is not as quick as wiring both, but steadier than both on Wi-Fi.

Option 2: Connect two computers directly with one cable

With no router in between, nothing hands out IP addresses, so you set them yourself.

  1. Connect the two PCs with the cable.
  2. On the first PC, open Control Panel > Network and Sharing Center > Change adapter settings. Right-click Ethernet, choose Properties, select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
  3. Choose Use the following IP address and enter IP address 192.168.50.1 and subnet mask 255.255.255.0. Leave the gateway and DNS empty. Click OK.
  4. Do the same on the second PC, using 192.168.50.2.
  5. Windows will probably call the connection an "Unidentified network" and treat it as Public. To make it Private, open PowerShell as administrator and run Set-NetConnectionProfile -InterfaceAlias "Ethernet" -NetworkCategory Private (use the adapter name shown in Change adapter settings if it is different).
  6. Turn on network discovery and file sharing as in Option 1.

If you skip the manual addresses, Windows usually gives each PC an automatic address starting with 169.254 after a minute or so, which also works. Run ipconfig on each PC to see it. Fixed addresses are just easier to type and remember.

When you finish, set both adapters back to Obtain an IP address automatically, or the PCs may not get online when plugged into a router later.

How to share and copy the files

  1. On the PC with the files, right-click the folder, choose Properties > Sharing > Share, select your account and confirm.
  2. On the other PC, open File Explorer and type the first PC's name or address in the address bar, for example \\OLD-PC or \\192.168.50.1, and press Enter.
  3. Sign in with the username and password of an account on the first PC.
  4. Copy the shared folder to where you want it, or use robocopy for big jobs: robocopy "\\192.168.50.1\Documents" "C:\Users\Sarah\Documents" /E /Z /R:2 /W:5.
  5. Stop sharing the folder when you are done.

Test with a small folder before starting the big copy. If the PCs cannot find each other, our guide to computers that can't see each other on a network walks through the usual fixes, starting with the network profile and firewall.

Is an Ethernet cable faster than Wi-Fi for file transfer?

Usually, yes. A gigabit wired link is typically faster than home Wi-Fi in practice, and, just as important, it is consistent. Wi-Fi speed rises and falls with distance, walls and other devices, which is why a transfer that starts fast can slow to a crawl.

SetupSpeedEffort
Both PCs on Wi-FiVaries with signal and routerLowest
One PC wired, one on Wi-FiBetter, limited by the Wi-Fi sideLow
Both PCs wired to the routerFast and steadyLow
Direct cable between the PCsFast and steadyManual IP and network settings

To check what speed a cable connected at, open Settings > Network & internet > Ethernet and look for the link speed, or open the adapter's status in Network and Sharing Center. If it says 100 Mbps rather than 1 Gbps, try another cable or port. Older routers and cheap adapters can also cap speed. For more tips, see our guides to transferring large files between computers and transferring files over Wi-Fi.

Doing it with Computer Copier

For moving to a new PC, Computer Copier removes the sharing and sign-in steps. Plug both PCs into your router with Ethernet cables, install it on each, then click Old PC on one and New PC on the other. The old PC finds the new one automatically and a 6-digit pairing code confirms it is yours. Files travel directly between the two PCs, with nothing uploaded anywhere.

It shows progress, speed and time left, can be paused, and if the cable is pulled out you can start it again and it carries on where it stopped. Every file is checked against the original, and it brings every user's folders, bookmarks, email data, Wi-Fi networks and network printers, not only the folders you share by hand.

Frequently asked questions

Do I need a crossover cable to connect two PCs directly?

Usually not. Most modern network ports detect the cable type automatically, so a standard Ethernet cable works between two PCs.

Is an Ethernet cable faster than Wi-Fi for file transfer?

Usually yes. A gigabit wired connection is typically faster and steadier than Wi-Fi, especially for large transfers.

What if my new laptop has no Ethernet port?

Use a USB to Ethernet adapter, or connect both PCs to the router, with only the old PC wired if that is all you can do.

Get three guides like this every month, plus software update notices.Subscribe →