A slow file transfer between computers is almost always caused by one bottleneck: a Wi-Fi connection, a USB 2 port or drive, thousands of small files, an old hard drive, or a PC that keeps going to sleep. Find which one applies, fix that, and the copy speeds up. Switching from Wi-Fi to an Ethernet cable, using USB 3 ports, and stopping both PCs from sleeping fix most slow transfers.
The transfer only runs as fast as the slowest link in the chain. Below is how to spot the bottleneck, followed by nine fixes that make a real difference.
Why is file transfer between computers slow?
Every copy passes through several stages: reading from the old PC's drive, travelling over the network or USB connection, and writing to the new PC's drive (or the external drive in between). Any one of them can hold the rest back.
| Symptom | Likely bottleneck |
|---|---|
| Speed jumps around and drops when you move the laptop | Wi-Fi signal |
| Steady but slow over a cable | Network link running at 100 Mbps instead of 1 Gbps |
| Slow to and from an external drive on every PC | USB 2 port, cable or drive |
| Fast for videos, crawls for some folders | Thousands of small files |
| Starts fast, then slows to a trickle | Drive cache full, or a slow USB stick or old hard drive |
| Stops completely after a while | Sleep mode, or a dropped connection |
Watch the speed in the Windows copy dialog (click More details to see the graph) and in Task Manager's Performance tab, which shows activity for each drive and network adapter. Whichever one sits near its limit is your bottleneck.
9 ways to speed up a slow file transfer
1. Use an Ethernet cable instead of Wi-Fi
Wi-Fi speed depends on distance, walls, interference and how many devices share the network, and both PCs are using the same airwaves. Plugging both into the router with Ethernet cables usually gives a faster and far steadier transfer. You can also connect the two PCs directly with one cable; see transferring files with an Ethernet cable.
2. Check the network link speed
A cable connection can still be slow if it is running at 100 Mbps. In Windows 11, open Settings > Network & internet > Ethernet and look at the link speed in the properties. If it shows 100 Mbps rather than 1000 Mbps (1 Gbps), try a different cable (older or damaged cables are a common cause), a different router port, or check whether one of the PCs only has a 100 Mbps port.
3. If you must use Wi-Fi, improve the signal
Put both PCs in the same room as the router, connect to the 5 GHz or 6 GHz band rather than 2.4 GHz if your router offers it, and pause other heavy users of the network, such as streaming and game downloads, while the transfer runs.
4. Use USB 3 ports, cables and drives
USB 2 is rated at 480 Mbps, while USB 3 starts at 5 Gbps. A USB 3 drive plugged into a USB 2 port, or connected with a USB 2 cable, runs at USB 2 speed. USB 3 ports are often blue inside or marked SS; USB-C ports vary, so check the PC's specifications. Plug directly into the PC rather than through a hub or front-panel port where you can.
5. Use a better drive in between
Cheap USB sticks often write slowly, especially after their small cache fills up, which is why a copy can start fast and then crawl. An external SSD, or a decent external hard drive, keeps a more consistent speed for large amounts of data. Our external hard drive guide covers choosing and formatting one.
6. Deal with thousands of small files
Each file has its own overhead: it must be opened, created, written and closed on the other end. A folder of 50,000 small files copies far more slowly than a single video of the same total size. Options:
- Zip big folders of small files first (right-click, Compress to ZIP file), copy the ZIP, and extract it on the new PC.
- Use
robocopywith multiple threads, for examplerobocopy "D:\Projects" "\\NEW-LAPTOP\Projects" /E /MT:16, which copies several files at once. - Leave out folders you do not need, such as caches and old installers in Downloads.
7. Stop the PCs from sleeping
Windows does not always count a long copy as activity, so a PC can sleep part-way through and break the transfer. On both PCs, open Settings > System > Power & battery (Windows 11) or Power & sleep (Windows 10), and set sleep to Never while plugged in. Plug laptops into power, since many slow down on battery.
8. Reduce competition for the drive
A copy competes with everything else using the same drive. On the old PC, close programs, pause OneDrive or other sync apps, and avoid starting a full antivirus scan or Windows Update during the transfer. Do not turn off your antivirus; just avoid running heavy tasks at the same time. On older PCs with a hard drive rather than an SSD, this makes a noticeable difference.
9. Do not copy cloud files you already have
If OneDrive uses online-only files, copying the OneDrive folder forces each file to download before it can be copied. That turns a local copy into an internet download. Let OneDrive sync on the new PC instead and leave its folder out of the transfer. See OneDrive on a new computer.
What if the transfer keeps failing?
A transfer that stops part-way is worse than a slow one, because File Explorer offers little help resuming it. You are left working out which files made it and copying the rest again. robocopy handles this better: run the same command again and it skips files that are already identical. If the two PCs cannot see each other at all on the network, work through why computers can't see each other on the network first.
The easier way: see the speed and carry on where it stopped
Computer Copier shows progress, speed and time left throughout the transfer, so you can see straight away whether a change (such as plugging in a cable) helped. It works over Wi-Fi or Ethernet, or through a USB stick or external drive, and there is a pause button if you need the network or the PC for something else.
If a transfer is stopped or interrupted, start it again and it carries on where it stopped, skipping files already copied. Over the network, a half-copied file continues from where it got to rather than starting over. Every file is checked against the original, and the transfer report lists anything that could not be copied, with the reason.
Frequently asked questions
Why is copying many small files so slow?
Each file has its own overhead, so thousands of small files copy much more slowly than one large file of the same total size.
Does USB 3 make a big difference?
Yes. USB 3 ports and drives are many times faster than USB 2. Blue or SS-marked ports are usually USB 3.
Can sleep mode interrupt a transfer?
Yes. Plug laptops into power and stop them sleeping during a long transfer.
