The most reliable way to transfer large files from one PC to another is a direct connection: a wired Ethernet network or a fast USB 3 external SSD, using a copy method that can resume if it is interrupted. For hundreds of gigabytes, avoid cloud uploads and plain Wi-Fi drag-and-drop where you can, and use a tool such as Windows' built-in robocopy command rather than File Explorer, because it retries and restarts cleanly.
Below is why big copies fail, how to pick the fastest route between your two PCs, and the exact commands to make a large transfer survive a dropped connection.
Why do large file transfers fail halfway?
A copy of a few files rarely goes wrong. A copy of 300,000 files or a 50 GB video folder has many more chances to hit a problem. The usual causes are:
- Sleep and screen lock. If either PC goes to sleep, a network copy stops.
- A dropped Wi-Fi connection. Even a few seconds can end a File Explorer copy.
- Locked files. Files open in another program, such as an Outlook PST, may refuse to copy.
- Long paths. Deeply nested folders can exceed the classic 260-character path limit some tools still respect.
- FAT32 drives. A USB stick formatted as FAT32 cannot hold a single file of 4 GB or more.
- Not enough space on the destination, which only shows up near the end.
File Explorer offers Skip or Try Again for some errors, but if the copy is cancelled you are left to work out which files made it. Starting again means either copying everything twice or choosing "Skip" for every duplicate.
What is the fastest way to move large files between PCs?
Speed depends on the slowest link in the chain. Roughly, from usually fastest to usually slowest:
| Route | Typical strengths | Typical drawbacks |
|---|---|---|
| Both PCs wired to the same router or switch | Stable, no drive to shuttle, no size limit | Needs Ethernet ports and cables |
| USB 3 external SSD | Fast, works without any network | Copy happens twice (onto drive, then off it) |
| Wi-Fi on the same network | No cables | Speed varies with distance and interference |
| External hard drive or USB stick | Cheap, simple | Slower with lots of small files |
| Cloud storage | Works across locations | Upload then download; slow on most home connections |
If you have a choice, plug at least the old PC into the router with a cable. Our guide to transferring files between computers with an Ethernet cable covers the setup, and why file transfers between computers are slow explains what to check if speeds disappoint.
Prepare both PCs before a big copy
- Stop sleep. In Settings, go to System > Power (Windows 11) or Power & sleep (Windows 10) and set sleep to Never while plugged in. Change it back afterwards.
- Plug laptops into power. Battery saving modes can throttle network and disk speed.
- Close programs that hold large files open, especially email clients and video editors.
- Check free space on the new PC (or the external drive) against the total size of what you are copying.
- Pause heavy syncing. OneDrive uploading at the same time competes for bandwidth.
How to transfer large files from one PC to another with robocopy
Robocopy ("Robust File Copy") is built into Windows 10 and 11. It retries on errors, skips files that are already copied and identical, and writes a log. You can run it from Command Prompt or Terminal.
First share the folder on the old PC, or the destination on the new PC. In File Explorer, right-click the folder, choose Properties > Sharing > Advanced Sharing, tick Share this folder and set permissions. Both PCs should be on a network set to Private under Settings > Network & internet, with network discovery on.
Then, on the new PC, run something like this. Here Sarah's Videos folder was shared on the old PC as SarahVideos; replace the names with yours:
robocopy \\OLD-PC\SarahVideos C:\Users\Sarah\Videos /E /Z /R:3 /W:5 /MT:8 /LOG:C:\robocopy-videos.txt
/Ecopies all subfolders, including empty ones./Zuses restartable mode, so a big file interrupted mid-copy can continue rather than start from zero./R:3 /W:5retries a failed file 3 times, waiting 5 seconds between tries. The default retry count is very high, which can make robocopy look stuck./MT:8copies 8 files at a time, which helps with many small files./LOG:saves a log you can check for failures afterwards.
If the copy stops for any reason, run the same command again. Robocopy compares the two sides and only copies what is missing or different. Check the summary at the end of the log for anything listed under "FAILED".
Copy into the right place. Robocopy copies the contents of the source folder into the destination, so the source and destination should be the same folder on each PC (Videos to Videos), not a parent folder on one side and a subfolder on the other.
Using an external drive for very large transfers
If the network is unreliable or you have no network at all, an external SSD is often the quickest option. Format it as exFAT or NTFS so files over 4 GB fit, then use the same robocopy command with the drive as the destination, and again from the drive to the new PC. See transferring files with an external hard drive for the full process, including what to do when your files are larger than the drive.
Why not just use the cloud?
For a few gigabytes, uploading to cloud storage is convenient. For a whole PC, it means uploading everything on your home connection, which is usually far slower than downloading, and then downloading it all again. You may also need a larger paid storage plan for a few weeks. Upload speeds vary too much to predict a time, but for hundreds of gigabytes, expect a direct transfer to be much quicker.
Doing it with Computer Copier
Robocopy is reliable, but you have to set up shares, type paths for every folder and every user, and read logs. Computer Copier handles large moves between two 64-bit Windows 10 or 11 PCs without any of that:
- Direct over your home network, Wi-Fi or Ethernet. Click "Old PC" on one and "New PC" on the other, confirm a 6-digit pairing code, and nothing is uploaded anywhere.
- Resumes where it stopped. If the transfer is stopped or interrupted, start it again and files already copied are skipped; over the network, a half-copied file continues from where it got to. There is also a Pause button.
- Progress, speed and time left are shown throughout, and every file is checked against the original.
- Drives that fill up. For USB transfers it asks for the next drive and splits big files across drives. The same package can also be written to a NAS or network share.
Sizes for everything are shown before you start, so you know whether the new PC has room. At the end, a transfer report lists anything that could not be copied and why.
Frequently asked questions
What is the fastest way to transfer large files between PCs?
A wired gigabit network or a fast USB 3 SSD. Wi-Fi and cloud uploads are usually much slower for hundreds of gigabytes.
Why does copying a large folder in File Explorer fail halfway?
Long paths, locked files, sleep mode or a dropped connection can stop a copy. File Explorer does not always resume cleanly afterwards.
Can I upload large files to the cloud instead?
You can, but uploading and downloading hundreds of gigabytes can take days on a typical home connection and may need a paid storage plan.
